[logo on white]

 [home page]



Centrifugal Dryers

Greco Brothers is pleased to offer New Holland Centrifugal Dryers for applications where our hot air convection part dryers may not be appropriate. Centrifugal dryers are most commonly used to dry small parts being processed in bulk. Due to the close proximity of the parts and resistance they offer to free air flow, these applications often present challenges to normal hot air parts dryers. Centrifugal drying overcomes those obstacles and speeds production by drying two ways. Centrifugal force from the spinning action of the basket "throws off" excess water, oils, or other liquids. At the same time, a turbine fan mounted below the basket creates a powerful suction that pulls heated air through the parts load for added drying power. This double-drying action assures fast drying and reduces the scarring and marring frequently responsible for costly rejects. In most cases, producing spot-free, moisture-free parts in under 60 seconds.
Standard Models
Click on links below for specifications

Model K11
Model K24
Model K90
Model K94
6" dia. x 6" high
(bench top size)
12" dia. x 12" high
 
18" dia. x 18" high
 
18" dia. x 24" high
 

Dimensions refer to basket size (diameter x height)

 

 

Model K-11 Tabletop Dryer ­
6"x 6"
- Perfect for Jewelry!


Overall Height 19.5"
Work Height 16 1/8"
Table Space Required 9 3/8" x 14"
Weight 79 lbs.
Operating Speed 1,100 rpm
Motor Size 1/8 hp
Basket Size 6"x6"
Capacity 7 lbs.
Bearings 2, sealed ball
Reversible Control No
Drive Direct coupled
Constuction Arc-welded steel plate
Electrical System 110/120 VAC 50/60Hz
Heating Unit 600 watts switchable electric
Meets N.E.C. Specifications Yes
U.L. Recognized Yes
Grease Fittings None

 


[top of page]

 

 

Model K-24 ­ 12"x 12"
Overall Height 36.5"
Work Height 30 1/2"
Floor Space Required 24" x 37"
Weight 400 lbs.
Operating Speed 825 rpm
Motor Size 1 hp
Basket Size 12" x 12"
Capacity 75 lbs.
Bearings 2, tapered roller
Reversible Control Yes
Drive 2 V-belts
Constuction Arc-welded steel plate
Electrical System 208, 220, 440, or 550 VAC at 60Hz; 380 VAC at 50Hz; 3-phase
Heating Unit (Optional) electric; steam
Meets N.E.C. Specifications Yes
U.L. Recognized Yes
Grease Fittings Exposed
Meets J.I.C. Specifications Yes
Rust- and acid-resistant paint Yes
Mechanical braking system Yes
Safety interlock switch Yes

AVAILABLE OPTIONS
 
Soft Start Yes
Variable Speed Yes
Timer Yes
Temperature Control Yes

 


[top of page]


 

 

Model K-90 ­ 18"x 18"
Overall Height 40.5"
Work Height 37"
Floor Space Required 31" x 40"
Weight 615 lbs.
Operating Speed 625 rpm
Motor Size 2 hp
Basket Size 18" x 18"
Capacity 150 lbs.
Bearings 2, tapered roller
Reversible Control Yes
Drive 2 V-belts
Constuction Arc-welded steel plate
Electrical System 208, 220, 440, or 550 VAC at 60Hz; 380 VAC at 50Hz; 3-phase
Heating Unit (Optional) electric; steam
Meets N.E.C. Specifications Yes
U.L. Recognized Yes
Grease Fittings Exposed
Meets J.I.C. Specifications Yes
Rust- and acid-resistant paint Yes
Mechanical braking system Yes
Safety interlock switch Yes

AVAILABLE OPTIONS
 
Soft Start Yes
Variable Speed Yes
Timer Yes
Temperature Control Yes

 


[top of page]


 

 

Model K-94 ­ 18"x 24"
Ideal for high-volume finishing and
machine shops


Overall Height 46.5"
Work Height 43"
Floor Space Required 31" x 40"
Weight 690 lbs.
Operating Speed 625 rpm
Motor Size 3 hp
Basket Size 18" x 24"
Capacity 250 lbs.
Bearings 2, tapered roller
Reversible Control Yes
Drive 2 V-belts
Constuction Arc-welded steel plate
Electrical System 208, 220, 440, or 550 VAC at 60Hz; 380 VAC at 50Hz; 3-phase
Heating Unit (Optional) electric; steam
Meets N.E.C. Specifications Yes
U.L. Recognized Yes
Grease Fittings Exposed
Meets J.I.C. Specifications Yes
Rust- and acid-resistant paint Yes
Mechanical braking system Yes
Safety interlock switch Yes

AVAILABLE OPTIONS
 
Soft Start Yes
Variable Speed Yes
Timer Yes
Temperature Control Yes

 


[top of page]


 

 

DESCRIPTION OF OPTIONS

The following options are available for models K-24, K-90, and K-94:

  • Soft Start provides a smooth, stepless, reduced-voltage acceleration of the parts load to minimize scarring and scratching of delicate parts. You simply adjust the initial torque and timing of the Soft Start to fit your needs.

  • Variable speed permits reduced-speed operation to minimize damage to sensitive parts

  • Timer assists the operator in controlling the time of the complete drying cycle

  • Temperature control maintains heating within a controlled range for parts that are sensitive to excess heating


Greco Brothers Incorporated
1 Greco Lane
Providence, RI 02909
401-421-9306

info-dry@grecobrothers.com

 [top of page]

 [contact us]

 [home page]